How To Start Chevy Equinox With Key Fob

To Remote Start The 2018 Chevy Equinox, Hit The Lock Button Twice On The Key Fob, Then Hold The Remote Start Button Down For About 10 Seconds Likealternative Like

Turn the flip key to the off/lock position and remove it. Then press and hold the remote start button for at least four seconds on the key fob. Insert a working flip key into the ignition and turn to the on/run position (just shy of cranking engine).

Every Two Years Or So, Or When The Battery Is Low, You May Need To Change The Key Fob Battery.

In this video, i demonstrate how to program an extra key for my 2018 chevy equinox. For security purposes, one touch of that button on the door handle just unlocks that door. Step by step how to programming instructions:

Insert The Original, Already Programmed Key In The Ignition And Start The Engine.

Same as the remote you can purchase at your local chevrolet dealership. How to program a 2019 chevrolet equinox keyless entry remote fob smart key. By default, the engine will shut off after 15 minutes if the ignition is not started.

Each Vehicle Can Have Up To Eight Transmitters Matched To It.

The turn signal lights flash and the engine starts. If you press the button a second time, the rest of the doors will be unlocked. You can remotely start your chevy equinox by following these simple steps:

Insert A Working Flip Key Into The Ignition And Turn To The On/Run Position (Just Shy Of Cranking Engine).

The vehicle’s engine should switch on at this point. Here is all the information you need. To start, with the key fob on you, locate the button on one of the door handles of your chevy vehicle.